Pasa-Jell™ 101
Products Description
Pasa-Jell™ 101 is a blend of mineral acids, activators, and inhibitors.
Pasa-Jell™ 101 is designed to clean and passivate stainless steel that has started to corrode. It is convenient to use in field passivations because stainless steel equipment can be passivated without disassembling.
Pasa-Jell™ 101 accomplishes the passivation of stainless steel by removing foreign materials and corrosion products that could set up local cells and cause pitting corrosion, and by forming an extremely thin but corrosion-resistant adherent oxide film on the metal.
Pasa-Jell™ 101 can also be used to remove anodized coatings from aluminum.
Its consistency is such that it can be used for soft- stripping of anodized coatings, thus eliminating the need to mask areas to be welded when large aluminum sheets are to be anodized.
Use
- For cleaning and passivation of stainless steel
- For removal of anodized coatings from aluminum
Storage / Precautions
Pasa-Jell products are non-flammable and have a shelf life of one year without significant loss of activity when stored in a cool, dry area in the original, unopened containers.
This product is safe to use and apply when the recommended precaustions are followed. Before using this product, read and understand the Safety Data Sheet (SDS), which provides information on health, physical and environmental hazards, handling precautions, and first aid recommendations.
Application
Remove oil or grease by wiping trhe area with an oil-free solvent (do not use reclaimed solvents) or by other effective methods. Allow the surface to dry. Apply Pasa-Jell 101 in a thick layer with a polyethylene, polypropylene, or fluorocarbon bristle brush. The coating should not be so thick that it will sag or run. Allow the coating to set for 5-10 minutes, then rinse with cool tap water. Allow the surface to dry.
Documents
Stainless Steel, Aluminum, and Titanium surface treatments for the aerospace industry.